Need help?Do you have a question about the Fujitsu FUTRO S920 and is the answer not in the manual?
General| L2 cache | 2 MB |
|---|---|
| Processor cores | 4 |
| Processor model | GX-415GA |
| Processor family | AMD G |
| Processor frequency | 1.5 GHz |
| Storage media | Flash |
| Card reader integrated | No |
| Total storage capacity | 8 GB |
| Memory slots | 1x SO-DIMM |
| Internal memory | 4 GB |
| Memory clock speed | 1600 MHz |
| Internal memory type | DDR3-SDRAM |
| Memory layout (slots x size) | 1 x 4 GB |
| On-board graphics card model | AMD Radeon HD 8330E |
| Ethernet LAN | Yes |
| Cabling technology | 10/100/1000Base-T(X) |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| VGA (D-Sub) ports quantity | 0 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| Operating system installed | Windows Embedded Standard 7 |
| Product color | Black |
| Operating temperature (T-T) | 10 - 35 °C |
| Sustainability certificates | EPEAT Gold, ENERGY STAR |
| AC input voltage | 120-230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 195 mm |
|---|---|
| Width | 52 mm |
| Height | 250 mm |
| Weight | 1300 g |
Defines symbols and text formatting used throughout the manual.
Details the ports and controls visible on the front of the device.
Details the ports and connectors located on the rear of the device.
Explains software and mechanical measures for protecting the device and data.
Instructions for using the physical security lock device to prevent theft.
Guidance on attaching optional covers to secure USB ports.
Provides essential safety instructions for device operation and handling.
Notes for preparing the device for use via the Power over Ethernet module.
Notes for preparing the device for use with an external graphics card.
Instructions for safely transporting and cleaning the device.
Information on energy efficiency, disposal, and recycling practices.
FCC compliance statements and radiation exposure information.
Initial steps and considerations for setting up the device.
Instructions for orienting the device in a vertical position.
Instructions for orienting the device in a horizontal position.
An overview of all available ports on the device.
How to connect a monitor to the device.
How to connect a mouse to the device.
How to connect a keyboard to the device.
Guide for connecting devices via the serial interface.
Guide for connecting devices via the USB ports.
Instructions for connecting audio input and output devices.
How to connect the device to a network using an Ethernet cable.
Steps for connecting the device to the power supply.
Instructions on how to power on the device.
Overview of supported operating systems and management solutions.
Details about the eLux operating system for thin clients.
Information on Windows operating systems for thin clients.
Description of the Scout Enterprise management solution.
Instructions on how to properly shut down and power off the device.
Guide to enable power saving mode for specific models.
How to access and navigate the BIOS Setup utility.
Instructions for performing a PXE network boot.
Information on when and how to update the BIOS.
Guidance on configuring system settings according to the OS.
Procedures for updating system software.
Detailed steps for updating the BIOS using a USB stick.
Detailed steps for opening the device casing for component access.
Lists optional components, compatibility, and handling precautions.
Details compatible combinations of system components for specific models.
Important information and precautions for handling internal boards.
Detailed steps for adding, removing, and installing memory modules.
Guide for installing and removing the SmartCard reader.
Instructions for installing and removing loudspeakers for specific FUTRO models.
Instructions for installing and removing speakers for ESPRIMO models.
Procedures for removing and installing the hard disk drive.
Guide for installing and removing the optional Power over Ethernet module.
General procedures for installing and removing expansion boards.
Instructions for replacing the CMOS lithium battery.
Steps for closing the device casing after component access.
Technical specifications for FUTRO and ESPRIMO models.
Information on operating and transport temperature ranges and ventilation requirements.
Details and specifications for the AC power adapter.
To Next Page