Need help?Do you have a question about the Fujitsu FUTRO S930 and is the answer not in the manual?
General| Processor Cores | 4 |
|---|---|
| Networking | Gigabit Ethernet |
| Video Outputs | 1 x HDMI, 1 x DisplayPort |
| Power Supply | External power adapter 65 W |
| Operating System | Windows 10 IoT Enterprise |
| Storage | 64GB SSD (expandable via mSATA) |
Explains symbols and text formatting used in the manual for clarity.
Shows and labels the front ports and controls of the device.
Shows and labels the rear ports and controls of the device.
Discusses software and mechanical locking for device and data protection.
Instructions on using the security lock device and Kensington lock cable.
How to attach optional USB covers to prevent unauthorized use of ports.
General safety precautions for operating and handling the device.
Instructions for using the device with a Power over Ethernet module.
Notes on using the device with an external graphics card.
Guidelines for safely transporting the device and its components.
Instructions on how to clean the device safely.
Information on energy efficiency, disposal, and recycling practices.
Details FCC and Industry Canada compliance and radiation exposure limits.
Instructions for properly setting up the device for operation.
Steps to set up the device in a vertical orientation.
Steps to set up the device in a horizontal orientation.
General instructions and precautions for connecting external devices.
Identifies and describes the various ports available on the device.
Steps for connecting a monitor to the device.
Instructions for connecting USB and PS/2 mice.
Instructions for connecting USB and PS/2 keyboards.
Guide for connecting devices via the serial port.
Guide for connecting devices via USB ports.
How to connect audio devices like microphones and headphones.
Steps to connect the device to a network using a LAN cable.
Instructions for connecting the power adapter and mains cable.
Steps to turn on the device and its monitor.
Overview of supported operating systems and management solutions.
Procedures for safely shutting down the device.
How to enable power saving features in BIOS.
Steps to access and navigate the BIOS Setup Utility.
How to perform a PXE boot.
Information on when and how to update the BIOS.
Guidance on configuring system settings.
Methods for updating system software.
Detailed steps for updating BIOS via USB.
Lists optional system components that can be installed.
Shows compatible combinations of system components.
General information and precautions for handling expansion boards.
Step-by-step guide to opening the device casing.
Instructions for installing or removing memory modules.
Instructions for installing the SmartCard reader.
Steps to safely remove the SmartCard reader.
Information on installing optional speakers for different models.
Instructions for installing and removing the loudspeaker in FUTRO models.
Instructions for installing and removing a speaker in the ESPRIMO A525-L.
Steps for installing a hard disk drive.
Instructions for installing the Power over Ethernet module.
General procedure for installing and removing expansion boards.
Steps for installing a PCIe board into the device.
Steps for removing an expansion board from the device.
Instructions for replacing the CMOS lithium battery.
Steps to close the device casing after component installation.
Technical specifications for FUTRO and ESPRIMO models.
Specifies operating and transport temperature ranges and ventilation.
Details electrical data and approved models for the AC adapter.
To Next Page