Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 11 chapter.
Setting up the device
In order to ensure tha t the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for h
orizontal or vertical operation (see "
Vertical o perating
position", Page 17 and
"
Horizon tal operating position", Page 19).
16 Fujitsu
To Next Page
Loading...
