System expansio ns
Removing th e loudspeaker
Loudspeaker
► Open the housing (see "O pening the casing", Page 34).
► If a PCIe board is installed, you must rem ove the cross piece and PCIe
board (see "
Removing the board", Page 60).
1
2
2
► Disconnect the loudspeaker cable from the mainboard (1).
► Undo the screws ( 2).
► Lift the loudspeaker out of the housing.
► When required, reinstall the cross piece and the P C Ie board (see "
Installing the board", Pa ge 58 ).
► Close the hou sing (see "
Closing the casing", Page 62).
Fujitsu 43
To Next Page
Loading...
