Fujitsu FUTRO S930 - Connecting a Monitor; Connecting the Mouse; Connecting the Keyboard

Getting started
Connecting a monitor
Only attach the screen to y our device when it is switched off.
► Follow the instructions contained in the m onitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor,
► Connect the data c able to the required monitor port on your device.
► Plug the monitor power cable into the grounded mains outlet.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device .
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USB p ort
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse w h en
the device is s witched off and then switch the device o n again.
► Connect th e PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Connect ing,PS/2mouse,
► Switch your device on again.
Connecting the keyboard
You can connect a USB keyboa rd or a PS/2 keyboard to your device.
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Conne cting,
► Insert the flat rectangular USB plug of the keyboard cable into one of the device’s USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaP S /2keyboardConnecting,
The P S/2 keyboard is only detected b y the d evice if you connect the keyboa rd
when the device is switched off and then switch the device on again.
► Switch your device off.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Key
board,
► Switch your device on again.
22 Fujitsu