Fujitsu Heat pump, split, single service - Page 7

Instruction manual “1353-EN” 7
Heat pump, split, single service
5 Selectingtheheatingmode
-
Heating operating according to the heating programme
(Summer/wintermodeswitchoverisautomatic).
-
Constantcomforttemperature.
-
Constantreducedtemperature.
-
Stand-by mode with anti-frost protection (Provided that the
heatpump'selectricalpowersupplyisnotinterrupted).
6 Informationdisplay
-
Variousdata(pleaseseepage 15).
-
Readingerrorcodes.
-
Informationconcerningmaintenance,specialmode.
7 Confirm"OK"
-
Inputintotheselectedmenu.
-
Confirmationoftheparametersettings.
-
Confirmationoftheadjustmenttothecomforttemp.setting.
8 Selectingcoolingmode
-
Iftheinstallationisfittedwiththecoolingkit:
-
Cooling operating according to the heating programme
(Summer/wintermodeswitchoverisautomatic).
9 RESET button
(Holddownthe"RESET"keyfor3seconds).
-
Reinitialisingtheparametersandcancellingerrormessages.
Donotuseduringnormaloperation.
10 Selectingtheheatingmode
-
Heating operating according to the heating programme
(Summer/wintermodeswitchoverisautomatic).
- Constantcomforttemperature.
- Constantreducedtemperature.
- Stand-by mode with anti-frost protection (Provided that the
heatpump'selectricalpowersupplyisnotinterrupted).
11 Digitaldisplay
-
Operating control. Readout of the current temperature, of the
heatingmodeandofanyfaults .
12 Controlknob
-
Adjustingtheambienttemperaturesetpoint
13 Occupancykey
-
Comfort/Reducedswitchover
Ref.
Function
-
Definitions