Fujitsu Heat pump, split, single service - Operation of the Installation; User Interface

6 Instruction manual “1353-EN”
Heat pump, split, single service
Ref.
Function
-
Definitions
1
SelectionoftheDHWoperatingmode
(Domestichotwater)
-
IftheinstallationisfittedwithaDHWtank.
-
ON: ProductionofDHWaccordingtothetimeprogram.
-
Off: No domestic hot water heating, anti-frost function is active.
-
Boost: Hold down the DHW key for 3 seconds. Immediate DHW
operation after use of the electrical back-ups until the DHW
comfortsettinghasbeenreached
2 Digitaldisplay
-
Operating control. Readout of the current temperature, of the
heatingmodeandofanyfaults .
-
Viewthesettings
3 Exit"ESC"
-
Quitthemenu.
4 Navigationandsetting
-
Selectingthemenu.
-
Settingp
arameters.
-
Adjustingtheambienttemperaturesetpoint.
Figure 2
1
2
3
4
5
6
7
8
9
°C
10
12
13
11
User interface
Remote control (option)
Room thermostat (option)
ON
Off
3 Operation of the installation
3.1 User interface