11
AIR OUTLET SELECTION
With this function , air come out simultaneously from the upper and lower air outlets so that the room can be cooled or heated
effectively. This function is set using the switch behind the front grille of the Indoor unit. (This function is available in cooling
and heating operation.)
How to set to blow out air from the upper and lower air outlets
■ Set the air outlet selection switch to
Air blows out automatically from the upper and lower air
outlets as shown in the table below.
NOTE:
Set the air outlet selection switch to the end. Otherwise, air outlet cannot be selected as intended.
Description of operation
Operation COOLING Mode DRY Mode HEATING Mode
Air flow
Conditions
Upper and lower
air flow
Upper air flow Upper air flow
only
Upper and lower
air flow
Upper air flow
Room tempera-
ture and set tem-
perature are dif-
ferent.
Room tempera-
ture is close to set
temperature, or
the air conditioner
has operated for
1hour.
_
Air flow tempera-
ture is high.
Air flow tempera-
ture is low.
(During defrost-
ing operation,
start of operation,
etc.)
How to set to blow out air from the upper air outlet only
■ Set the air outlet selection switch to
To Next Page
Loading...
