Fujitsu Inverter Halcyon 9374379378 - PREPARATORY OPERATION; Setting Current Day and Time; Starting and Stopping Operation

En-3
PREPARATORY OPERATION
Press the TIMER MODE (CLOCK
ADJUST) button for 2 seconds
or more. The time display on
the remote controller will flash.
2
SU MO TU WE TH FR SA
Press the DAY button and select the current day.
A
appears around the selected day.
Press the set time buttons to set the current time.
Press repeatedly to adjust the current time in
1-minute increments. Press and hold to adjust the
current time in 10-minute increments.
ex. Monday PM 11:00
Press again to end.
SU MO TU WE TH FR SA
1
3
5
Set the current day and time
Press the SET BACK button to switch between the
12- and 24-hour time displays.
3
4
SU MO TU WE TH FR SA SU MO TU WE TH FR SA
SET BACK
OPERATION
Instructions relating to heating are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
To start/stop operation
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the START/STOP button.
08M516_9374379378_en 2009.01.19, 14:093