Fujitsu IP Pathfinder S - About Incoming Call Log

4CALLLOG
ABOUT INCOMING CALL LOG
This is using 「CALLER ID SAVE DIAL」 of PBX's service function.
●
You can save manually the caller ID in two-party conversation at the outside line.
● The caller ID can register up to 8 telephone numbers per a telephone, and can
memorize up to 15 digits a telephone number.
● If the INCOMING CALL LOG has already been registered 8 telephone numbers at
'
the automatic save function' and 'the manual save function', the oldest
telephone number is deleted.
● The automatic save function can work in the incoming call from the various
o
utside line. (direct in-line, direct line, 󲥭oating line, dial-in, ISDN dial-
in, addition number dial-in, caller ID dial-in). However, the direct line and
the 󲥭oating line is saved automatically when you answer a call.
● The automatic save function and the manual save function is set with the
s
pecial number
(The example:130, 1(automatic operation), and 0(manual operation)) .
●
Please contact the purchased shop about the setting of the caller ID save dial.
● If you press 0 dial when the incoming call log was displayed, the displayed
incoming call log is deleted and the next incoming call log is displayed.
● If you lift a handset when you receive an incoming call while incoming call
l
og is displayed, you can't answer a call. Please lift a handset after pushing
the 「caller ID save / display」 button whenever answering.
■ M
ethodofoperatingtheincomingcalllog
1 PresstheCALLERIDSAVE/DISPLAYbutton.
The telephone changes the screen of the incoming call log, and
display the telephone number of the incoming call log.
2 Press▲buttonor▼ button.
0441234567
Please press the button until a desired telephone number is
displayed.
3 Youliftthehandsetorpressthespeakerbuttonifa
desiredtelephonenumberisdisplayed.
The conversation begins when the calling party answers.
If you discontinue calling from INCOMING CALL LOG, you replace the
handset or press the speaker button.
26