5
SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS
The System Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information.)
The following tables show the names of the menu
fields for the System menu and its submenus, all of
the options for each field, the default settings and a
description of the field’s function and any special
information needed to help understand the field’s use.
Figure 2. System Menu
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Description
System Time: Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 dig-
its for each. (HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately.
Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys.
System Date: Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for
month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/2010. You may change each
segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] +
[Tab] keys.
Drive Configurations Opens the Drive Configurations submenu.
Phoenix SecureCore Tiano Setup
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Info System Advanced Security Boot Exit
Item Specific Help
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
System Time: [14:57:01]
System Date: [05/30/2012]
Drive Configurations
System Menu
Dowadge-Sinanju BIOS-test.fm Page 5 Sunday, September 16, 2012 2:28 PM
To Next Page
Loading...
