7
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
n
Enable or disable USB emulation support
n
Enable or disable Anytime USB Charge support.
n
Enable or disable the S-ATA controller
n
Enable or disable Virtualization Technology
feature.
n
Enable or disable wake up on LAN feature.
n
Adjust the fan.
(See Navigating through the Setup Utility on page 2 for
more information.)
The following tables show the names of the menu
fields for the Advanced Menu and its submenus, all of
the options for each field, the default settings and a
description of the field’s function and any special
information needed to help understand the field’s use.
Figure 4. Advanced Menu
Table 4: Fields, Options and Defaults for the
Advanced Menu
Phoenix SecureCore Tiano Setup
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Info System Advanced Security Boot Exit
Item Specific Help
Legacy USB Support: [Enabled]
Anytime USB Charge: [AC]
Serial ATA Controller: [Enabled]
AHCI Configuration: [Enabled]
Internal Camera: [Enabled]
USB3.0 Controller: [Enabled]
Virtualization Technology: [Enabled]
Wake up on LAN: [Disabled]
FAN Control: [Normal]
ODD Power Management: [Enabled]
Intel(R) AT Suspend Mode: [Disabled]
Event Logging (”Event Logging” cannot be seen
until the [F4] button is pressed)
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
Menu Field Options Default Description
Legacy USB Support
Disabled
Enabled
[Enabled] When Enabled is selected, Legacy USB Emulation is
enabled and the USB devices are available without a
USB-aware OS. When Disabled is selected, Legacy USB
support is disabled.
Anytime USB Charge:
Disabled
AC
AC/Battery
[AC] Lets you set under what conditions Anytime USB Charge
will work; with AC Power, AC Power or battery, and dis-
abled.
Advanced Menu
Dowadge-Sinanju BIOS-test.fm Page 7 Sunday, September 16, 2012 2:28 PM
To Next Page
Loading...
