Working with the noteboo k
Module
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following modules can be operated in the module bay of your notebook:
• Second battery
• Second hard disk drive
• Optical drive
• Empty plug-in unit (save weight)
Only use modules designed for your notebook.
Do not use force when in stalling or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
To re place a module, simply click on the corresponding icon in the
task bar and then on Exit or Select - Exit.
The module can now be removed without any further a ctions being necessary.
Removing a module
1
2
ModuleDriveWei ghtSaver
► Pull the unlocking lever in the direction of the arrow (1).
► Now pu
ll the module out of the module bay (2).
34 Fujitsu Technology Solutions
To Next Page
Loading...
