Why does my Fujitsu Lifebook LH530 Laptop keep changing setup parameters?
If your Fujitsu notebook appears to change setup parameters when you start it, BIOS setup changes were not saved before you exited the utility. Make sure you select Save Changes And Exit when exiting the BIOS setup utility.
Why does my external keyboard/mouse lock up my Fujitsu Lifebook LH530?
If you have connected an external keyboard or a mouse to your Fujitsu Laptop and it seems to be locking up the system, your operating system software might not be setup with the correct software driver for that device. Check your device and operating system documentation and activate the proper driver.
What to do if can't access hard drive on Fujitsu Lifebook LH530?
If you cannot access your hard drive on your Fujitsu Laptop, the wrong drive designator might have been used by an application when a bootable disc was used to start the notebook. Verify the drive designator used by the application is in use by the operating system. Also, security settings might prevent your OS from starting without a password, so verify your password and security settings.
What if my Fujitsu Lifebook LH530 Laptop won't load operating system?
If the system powers up and displays power on information, but fails to load the operating system on your Fujitsu Laptop, the boot sequence settings of the setup utility might not be compatible with your configuration. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen, or use the [F2] key to enter the setup utility and adjust the source settings from the Boot menu. Also, the internal hard drive might not be detected; use the BIOS setup utility or Primary Master submenu, located within the Main menu, to try to auto detect the internal hard drive. If you have a secured system, ensure you have the correct password and verify the Security settings in the setup utility.
How to fix a blank screen on Fujitsu Lifebook LH530?
If the built-in display is blank when you turn on your Fujitsu LifeBook notebook, it might be set for an external monitor only. Press [F10] while holding down the [Fn] key to cycle through display options: built-in display only, external monitor only, or both. Also, ensure the display angle and brightness settings are adequate for your lighting conditions. Adjust the brightness using the [F6] or [F7] keys while holding down the [Fn] key. Finally, power management timeouts may be set for short intervals; press a keyboard button or move the mouse to restore operation, or push the Power/Suspend/Resume button.
Why does my Fujitsu Lifebook LH530 keep turning off?
If your Fujitsu LifeBook notebook turns off by itself, ensure the power adapter is properly plugged in and the outlet has power. If you're using battery power, the system might have entered Dead Battery Suspend mode because the battery is completely discharged. To resolve this, install a power adapter and then push the Power/Suspend/Resume button.
Why when I type on my Fujitsu Laptop keyboard I only get numerals?
If you're only getting numerals when typing on your Fujitsu Laptop, it's likely that the virtual numeric keypad is activated. To resolve this, press the Num key.
What to do if the external keyboard or mouse does not seem to work after installation on Fujitsu Lifebook LH530?
If the external keyboard or mouse does not seem to work after installation on your Fujitsu Laptop, your external device may not be properly installed; re-install your device. Your operating system software may not be set up with the correct software driver for that device; check your device and operating system documentation and activate the proper driver. If you are using an optional Port Replicator, your mouse or keyboard could be connected to the wrong PS/2 port; plug the mouse into the PS/2 Mouse port and the external keyboard or numeric key pad into the PS/2 Keyboard port.
Why is the built-in display blank when I turn on my Fujitsu LifeBook notebook?
If the built-in display is blank when you turn on your Fujitsu LifeBook notebook, something might be pushing on the Closed Cover switch; clear the Closed Cover switch. The notebook could also be set for an external monitor only; pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice: built-in display only, external monitor only, both built-in display and external monitor. The angle of the display and the brightness settings might also not be adequate for your lighting conditions; move the display and the brightness control until you have adequate visibility.
What to do if the built-in keyboard does not seem to work on Fujitsu Lifebook LH530?
If the built-in keyboard on your Fujitsu Laptop is not working, it could be because the notebook has entered Suspend mode; push the Power/Suspend/Resume button. Alternatively, the application you are using might have locked out the keyboard; try using your integrated pointing device to restart your system.
General| Display Resolution | 1366 x 768 pixels |
|---|---|
| Graphics | Intel HD Graphics |
| Operating System | Windows 7 Home Premium |
| Weight | 2.2 kg |
| Optical Drive | DVD Super Multi |
| Wireless | 802.11 b/g/n |
| LAN | 10/100/1000 Mbps |
| Card Reader | SD, SDHC |
| Ports | USB 2.0, VGA, HDMI, Ethernet |
| Storage | 320 GB / 500 GB HDD 5400 rpm |
Introduces the manual and its purpose.
Identifies and describes the notebook's external ports and buttons.
Details the available power sources for the notebook and how to connect them.
General steps for identifying and resolving notebook problems.
A troubleshooting table listing common problems and solutions.
Lists common WLAN problems and their solutions.
To Next Page
