EasyManuals Logo

Fujitsu LifeBook N Series Bios Guide

Fujitsu LifeBook N Series
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu allows you to set hard disk security parameters.
Figure 6. Hard Disk Security Submenu
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Table 6: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Drive0: --- Clear Display-only field
Set Master Password
---
[Enter] Allows you to set the Drive0 Master Password. The hard disk is locked with
the password. Data in the locked disk cannot be read on other systems.
Set User Password --- [Enter] Allows you to set the Drive0 User Password. The hard disk is locked with
the password. Data in the locked disk cannot be read on other systems.
Drive1:
---
Not Available Display-only field
Set Master Password --- [Enter] Allows you to set the Drive1 Master Password. The hard disk is locked with
the password. Data in the locked disk cannot be read on other systems.
Set User Password
---
[Enter] Allows you to set the Drive1 User Password. The hard disk is locked with
the password. Data in the locked disk cannot be read on other systems.
Password Entry On
Boot:
Disabled
Enabled
[Enabled] When disabled, Hard Disk Password entry is not required before OS boot.
The hard disk is still password-protected without password entry.
Phoenix SecureCore Tiano Setup
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Info System
Advanced Security Boot Exit
Item Specific Help
Press <Enter> key to
set Supervisor
Password to enable
any password features.
Then password entry
is required to enter
BIOS Setup.
Drive0: Clear
Set Master Password [Enter]
Set User Password [Enter]
Drive1: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Password Entry on Boot: [Enabled]
Security Menu

Other manuals for Fujitsu LifeBook N Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu LifeBook N Series and is the answer not in the manual?

Fujitsu LifeBook N Series Specifications

General IconGeneral
BrandFujitsu
ModelLifeBook N Series
CategoryLaptop
LanguageEnglish

Related product manuals