Fujitsu LifeBook N Series - Advanced Menu - Setting Device Feature Controls

7
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
• Enable or disable USB emulation support
• Enable or disable Anytime USB Charge support..
• Enable or disable the S-ATA controller
• Enable or disable Virtualization Technology feature.
• Enable or disable wake up on LAN feature.
• Adjust the fan.
(See Navigating through the Setup Utility on page 2 for
more information.)
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
Figure 4. Advanced Menu
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field Options Default Description
Legacy USB Support  Disabled
 Enabled
[Enabled]
When Enabled is selected, Legacy USB Emulation is
enabled and the USB devices are available without a
USB-aware OS. When Disabled is selected, Legacy USB
support is disabled.
Anytime USB Charge:  Disabled
 AC
 AC/Battery
[Disabled] Lets you set under what conditions Anytime USB Charge will
work; with AC Power, AC Power or battery, and disable.
Phoenix SecureCore Tiano Setup
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Info System Advanced Security Boot Exit
Item Specific Help
Legacy USB Support: [Enabled]
Anytime USB Charge: [Disabled]
Serial ATA Controller: [Enabled]
AHCI Configuration: [Enabled]
Virtualization Technology: [Disabled]
Wake on LAN: [Disabled]
FAN Control: [Normal]
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
Advanced Menu