Removing and installing components
during servicing
Removing a cover
► Remove the battery (see Chapter "Removing the battery", Page 30).
1
3
1
1
1
1
2
► Remove the screws from the cover of the hard disk service compartment (1).
► Remove t he screw f rom the cover of the memory service compartment (2).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual compone nts separately from each
other. If you install the w rong screws, components may be damaged.
► Lift the cove
r off the notebook (3).
54 Fujitsu Technology Solutions
To Next Page
Loading...
