13
Base I/O Address: 378
278
3BC
[378] E752, S752,
S762
Allows you to select the base I/O address for the port
when it is enabled.
Interrupt:
IRQ 5
IRQ 7
[IRQ 7] E752, S752,
S762
Allows you to select the interrupt number for the port
when it is enabled.
DMA Channel:
DMA 1
DMA 3
[DMA 1] E752, S752,
S762
Allows you to select the DMA channel for the parallel
port when it is enabled and and mode is “ECP”.
Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of the Advanced
Menu
Menu Field Options Default Model Description
Advanced Menu
To Next Page
Loading...
