Ports and operating elem en ts
Removing and installing the bat
tery
NotesBattery
Only use rechargeable batteries approved by Fujitsu Technology
Solutions for your notebook.
Never use force when inserting or removing a batte ry.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power plug out of the mains socket.
Battery
► Close the LCD screen so that it locks i
nto place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on
a stable, flat a n d clean surface. If necessary, lay
an anti-slip cloth on this surface to p
revent th e notebook from being scratched.
1
3
2
► Slide the re lease b utton i n direction of the arrow (1).
► Slide the battery lock (2) in the direction of the arrow as far as possible and hold it in place.
► Remov e the batter y fr om the battery compartment (3).
A26391-K274-Z220-1-7919, edition 1 17
To Next Page
Loading...
