159
- Troubleshooting the WLAN
Unavailable
network
connection
(continued)
The computer to be
connected is turned
off
Check if the computer to be connected is turned ON.
RF interference
f
rom Access Points
or other wireless
networks
The use of identical or overlapping RF channels can cause interference
with the o
peration of the WLAN device. Change the channel of your
Access Point to a channel that does not overlap with the interfering
device.
Wireless network
auth
entication has
failed
Re-check your Network Authentication, Encryption, and Security
settings. Incorrectly configured security settings such as an incorrectly
typed WEP key, a mis-configured LEAP username, or an incorrectly
chosen authentication method will cause the LAN device to associate but
not authenticate to the wireless network.
Incorrectly
co
nfigured network
settings
Recheck the configuration of your network settings.
Incorrect IP address
c
onfiguration
This only applies to networks using static IP addresses. Please contact
your network administrator for the correct settings.
Problem Possible Cause Possible Solution
To Next Page
Loading...
