77
- Using Express/PC Cards
Removing Express/PC Cards
See your Express Card or PC Card manual for specific instructions on removing your card. Some cards
may require your notebook to be in Standby Mode or Off during removal.
To remove a Express Card or PC Card, follow these steps:
1 Unlock the card or card plug from the slot by pressing the eject button. When pressed, the button will pop out.
2 Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot
allowing you to remove the card.
• WINDOWS HAS A SHUTDOWN PROCEDURE FOR EXPRESS CARDS AND PC CARDS THAT MUST BE FOLLOWED
BEFORE REMOVING A CARD. (REVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE.) IT
IS GOOD PRACTICE TO REMOVE DEVICES USING THE SAFELY REMOVE HARDWARE ICON IN THE SYSTEM TRAY.
• IF THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED, YOU MUST SAVE ALL OF YOUR OPEN FILES,
CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK.
To Next Page
Loading...
