Connecting external devices
Connecting an external m onitor
The notebook itself does not have a DVI port. The optional Port Replicator
available for your notebook provides this port.
An analogue monitor is connected to the ana logue VGA monitor port, a digital monitor to
the DVI monitor port. Screen output is limited to a maximum of two screens at any one
time (see "
Key comb ination s", Page 27, section "Toggle output screen").
MonitorVGAconnection socketScreenportMonitorport
Digital DVI monit
or port
Analogue V GA monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor po rt.
► First switch on the external monitor and then the notebook.
You can also switch back and fo rth between the external monitor and the notebook’s
LCD monitor, see chapte r "
Key combinations", Page 27.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu Technology Solutions 65