Connecting e xtern a l devices
USB port with charging function (Anytime U SB charge)
USBchargingfunction
It is recommended that the notebook be operated with the po wer supply connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charging function will be disabled and
the connected USB devices will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to utilise the
USB charging function. In this case the USB charging fu nction will not work when the
notebook is switche d off, as no drivers are active when the notebook is switched off.
You can use this
USB port to charge or supply power to a USB device (e.g. to charge
a PDA or a m ob ile
phone or to connect a USB lam p).
Charging is al
so possible when the Tablet PC is switched off, if the Anytime USB Charge function
is activated i
ntheAdvanced menu of the BIOS Setup u tility. If the setting AC is selected thereby,
the device wil
l only be charged when the mains adapter is connected.
Please refe
r to section "
Settings in BIOS Setup Utility", Page 71 for a description
of how to cal
l up and operate the BIOS-Setup-Utility.
How to remo
ve USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of you r data is l ost.
► Left cl
ick on the ico n to safely remove hardware, located i n the taskbar.
► Select the device which you want to shut down and remove.
► Press t
he Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
Fujitsu 65
To Next Page
Loading...
