Fujitsu Lifebook T4220 - Miscellaneous Configurations Submenu of the Advanced Menu; Default Description

19
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
Figure 12. Miscellaneous Configurations Submenu
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of Advanced Menu
Menu Field Options Default Description
Power Button:
■
Disabled
■
Power Off
[Disabled] Selecting Disabled disables the power button. Selecting Power Off allows you to
turn off system power with the power button.
Wake up on LAN:
■
Disabled
■
Enabled
[Disabled] Enabled allows the system to wake up when the internal LAN device receives a
specific signal while in power-off state. Selecting Disabled disables this feature.
Force LAN Boot:
■
Disabled
■
Enabled
[Disabled] This feature is active only when “Wake up on LAN” is enabled. When enabled, in
the event of a system wake-up on LAN, the system will try to first boot from the
LAN before attempting to boot from any other device, regardless of the BIOS boot
priority settings or disabling of the Preboot Execution Environment.
Auto Save To Disk:
■
Off
■
On
[Off] Turns Auto Save To Disk feature on and off. When on, when a system in suspend
mode reaches a low battery state, it will save its state to disk then turn off.
Volume Setting:
■
Off
■
Minimum
■
Middle
■
Maximum
[Middle] Selects the initial volume setting for the system.
Hardware Power
Management:
■
Disabled
■
Enabled
[Enabled] Allows you to enable or disable the Hardware Power Management technology.
FAN Control:
■
Normal
■
Silent
[Normal] Determines the operating noise level of the fan.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
Power Button:
Wake up on LAN:
Force LAN Boot:
Auto Save To Disk:
Volume Setting:
Hardware Power Management:
FAN Control:
[Disabled]
[Disabled]
[Disabled]
[Off]
[Middle]
[Enabled]
[Normal]
Phoenix TrustedCore(tm) Setup Utility
Info System Advanced Security Boot Exit
Advanced Menu