13
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable Bluetooth, LAN, Wireless LAN, IEEE
1394 and internal camera controllers.
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field Options Default Description
Serial ATA Controller:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Serial ATA port.
AHCI Configuration:
■
Disabled
■
Enabled
[Enabled] Enables or disables the selected Advanced Host Controller Interface
(AHCI).
Bluetooth:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Bluetooth device.
LAN Controller:
■
Disabled
■
Enabled
[Enabled] Enables or disables the LAN controller.
Wireless LAN:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Wireless LAN controller.
IEEE1394 Controller:
■
Disabled
■
Enabled
[Enabled] Enables or disables the IEEE 1394 controller.
WWAN Device:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Wireless WAN device.
Ambient Light Sensor:
■
Disabled
■
Enabled
[Enabled] Enables or disables the Ambient Light Sensor feature.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
[Disabled]
Serial ATA port is
disabled.
[Enabled]
Serial ATA port is
enabled.
Internal Device Configurations
Serial ATA Controller: [Enabled]
AHCI Configuration: [Enabled]
Bluetooth(R): [Enabled]
LAN Controller: [Enabled]
Wireless LAN: [Enabled]
IEEE1394 Controller: [Enabled]
WWAN Device: [Enabled]
Ambient Light Sensor: [Enabled]
Info System Advanced Security Boot Exit
Phoenix SecureCore(tm) Setup Utility
Advanced Menu