Why my printer does not print from Fujitsu LifeBook T902?
If your printer isn't printing from your Fujitsu Tablet, ensure the printer is switched on and ready. Check that the data cable connecting the tablet to the printer is properly connected. Also, verify that the correct printer driver is loaded.
What to do if external monitor remains blank when connected to Fujitsu LifeBook T902?
If the external monitor remains blank when connected to your Fujitsu Tablet, first ensure that the monitor is switched on. If power saving has been activated, press any key to continue. Check the brightness settings of the monitor, and adjust if necessary. Also, verify that the screen output is correctly set, and if not, press the key combination to switch the screen output. Finally, switch off the external monitor and the tablet, then check the power and data cable connections before switching them back on.
What to do if my Fujitsu LifeBook T902 Tablet cannot be started?
If your Fujitsu Tablet won't start, check if the battery is correctly installed. Ensure it's properly placed in its compartment. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter. Also, verify that the power adapter is correctly connected to the tablet. Then, try switching the tablet on.
Why my Fujitsu LIFEBOOK Tablet PC doesn't recognize DVD/CD-RW/CD-ROM’s?
If your Fujitsu Tablet PC fails to recognize DVD/CD-RW/CD-ROM’s, first, ensure the disc is properly installed on the raised center circle of the drive. Check that the optical drive tray is latched shut. If not, pull out the modular drive latch and re-insert the drive. Ensure the correct DVD Player software is installed. Wipe the disc with a non-abrasive CD cleaning cloth. Verify the drive designator used by the application matches the one used by the operating system.
How to fix a blank display on a Fujitsu LIFEBOOK Tablet PC?
If the built-in display on your Fujitsu LIFEBOOK Tablet PC is blank, try pressing [F10] while holding down the [Fn] key to switch between display options. Adjust the display angle and brightness using the [Fn+F6] or [Fn+F7] keys. If power management time-outs are set too short, press a keyboard button, move the mouse, or push the Power/Suspend/Resume slide.
What to do if Fujitsu LIFEBOOK doesn’t recognize USB device?
If your Fujitsu LIFEBOOK doesn’t recognize a USB device, first remove and reinstall the device. Then, check your software documentation and activate the correct driver. If the device was installed while an application was running, close the application and restart your Tablet PC.
How to fix no sound on my Fujitsu LifeBook T902?
If there is no sound coming from the built-in speaker of your Fujitsu Tablet, first, adjust the volume control on your Tablet PC and operating system, using the [Fn+F9] key combination. If that doesn’t work, manually adjust the sound volume control settings in your software or application. Also, make sure headphones are not plugged in, as this disables the built-in speakers. Check the Volume icon in the system tray to ensure the speakers haven't been muted. Finally, ensure that the audio driver is configured correctly.
Why does my Fujitsu LifeBook T902 PC turn off by itself?
If your Fujitsu Tablet PC turns off unexpectedly, it could be due to several reasons. First, check your power management settings in the Control Panel to ensure the auto timeout values are appropriate. If you're running on battery, connect a power adapter and use the Power/Suspend/Resume slide. A battery failure can also cause this; verify the battery's condition and replace it if necessary. Finally, ensure your power adapter is properly connected and the outlet has power.
What to do if my Fujitsu LifeBook T902 stops working?
If your Fujitsu Tablet stops working, it might be in energy-saving mode, so try leaving that mode. It's also possible that an application is causing the issue, so close the application or restart the tablet (either by restarting the operating system or by turning the device off and back on). If the battery is dead, charge it, insert a charged battery, or connect the mains adapter.
Why does the battery discharge too quickly on my Fujitsu Tablet?
If your Fujitsu Tablet battery is draining quickly, it could be due to several factors. The battery might be too hot or too cold, which can cause the battery indicator to flash. Try to bring the tablet to a normal temperature. If the battery is old, consider replacing it. Also, some applications consume a lot of power by frequently accessing the hard disk or optical drive, so use the mains adapter when possible. Finally, reducing the screen brightness can also help conserve battery power.
General| Form factor | Convertible (Swivel) |
|---|---|
| Product type | Hybrid (2-in-1) |
| Product color | Black, Silver |
| Bus type | DMI |
| Stepping | L1 |
| Tjunction | 105 °C |
| Processor cache | 4 MB |
| Processor cores | 2 |
| Processor model | i7-3520M |
| System bus rate | 5 GT/s |
| Processor family | Intel® Core™ i7 |
| Processor series | Intel Core i7-3500 Mobile series |
| Processor socket | BGA 1023 |
| Processor threads | 4 |
| Processor codename | Ivy Bridge |
| Processor frequency | 2.9 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor front side bus | - MHz |
| PCI Express slots version | 3.0 |
| Processor boost frequency | 3.6 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | No |
| PCI Express configurations | 1x8, 1x16, 2x4, 2x8 |
| Thermal Design Power (TDP) | 35 W |
| CPU multiplier (bus/core ratio) | 29 |
| Maximum number of PCI Express lanes | 16 |
| Motherboard chipset | Intel® QM77 Express |
| Ambient light sensor | Yes |
| Memory slots | 2x SO-DIMM |
| Internal memory | 4 GB |
| Memory clock speed | 1600 MHz |
| Memory form factor | SO-DIMM |
| Internal memory type | DDR3-SDRAM |
| Maximum internal memory | 16 GB |
| Storage media | - |
| Total storage capacity | - GB |
| Compatible memory cards | SD, SDHC, SDXC |
| Display surface | Matt |
| Display diagonal | 13.3 \ |
| Display brightness | 300 cd/m² |
| Display resolution | 1600 x 900 pixels |
| Native aspect ratio | 16:9 |
| Contrast ratio (typical) | 500:1 |
| On-board graphics card ID | 0x166 |
| On-board graphics card model | Intel® HD Graphics 4000 |
| On-board graphics card family | Intel® HD Graphics |
| On-board graphics card base frequency | 650 MHz |
| On-board graphics card dynamic frequency (max) | 1250 MHz |
| Power adapter depth | 56 mm |
| Power adapter width | 148 mm |
| Power adapter height | 32 mm |
| Power adapter weight | 250 g |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Charging port type | DC-in jack |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| eSATA/USB 2.0 ports quantity | 0 |
| Pointing device | Touchpad |
| Keyboard number of keys | 85 |
| Bundled software | Adobe Reader |
| Processor code | SR0MU |
| Processor ARK ID | 64893 |
| Processor package size | 37.5 x 37.5 (rPGA988B); 31.0 x 24.0 (BGA1023) mm |
| Supported instruction sets | AVX |
| Intel Identity Protection Technology version | 1.00 |
| Battery capacity | 6700 mAh |
| Battery life (max) | 7.7 h |
| Battery recharge time | 3 h |
| Number of battery cells | 6 |
| AC adapter power | 100 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 5.27 A |
| AC adapter output voltage | 19 V |
| Cable lock slot type | Kensington |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 85 % |
| Sustainability certificates | RoHS, ENERGY STAR |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 326 mm |
| Weight | 1890 g |
| Height (rear) | 31 mm |
| Height (front) | 27.1 mm |
Introduces the tablet's components, covering top, side, back, and bottom panels for identification.
Details available power sources (battery, AC adapter) and how to connect them.
Guides on powering on the device, understanding the boot process, and initial setup.
Information on accessing and configuring system settings via the BIOS Setup Utility.
General steps for problem identification and a table of specific issues with their causes and solutions.
Troubleshooting common problems related to power, system startup, and display issues.
Addresses general system errors, miscellaneous problems, and Power On Self Test (POST) messages.
Explains WLAN modes, network setup, and offers solutions for common connection issues.
To Next Page
