Working with the noteb ook
Switching on the notebook via the port replicator
► Press the ON/
OFF button o n the port replicator to switch the notebook on.
Switching off notebook via Port Replicator
► Close all applications and shut dow n your operating system (please refer
to th e manual for the operating system).
► Press the ON/OFF button on the port replicator to switch the notebook off.
If the notebook cannot be shut do wn properly, press the ON/OFF button
of the notebook for about four seconds. The notebook will switch itself
off. Any unsaved data may however be lost.
Disconnecting the notebook from the Port Replicator
► Disconnect the supplied U SB cable (USB Type-C ) from the USB port Intel® Thunderbolt
TM
3
with charging function and display port (USB Type-C) of the notebook.
44 Fujitsu
To Next Page
Loading...
