EasyManua.ls Logo

Fujitsu LIFEBOOK U9310 - Restoring the System under Windows 10; The Notebooks Date or Time is Incorrect; When Certain Characters are Entered on the Keyboard, Only Numerals are Written; The Notebooks LCD Screen Remains Blank

Fujitsu LIFEBOOK U9310
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings in BIOS Setup Utility
Erase Disk
Erase Disk is a Fujitsu Technology Solutions feature embedded in the system rmware (UEFI:
Unied Extensible F irmware Inte rface), to erase all data from SATA hard disk(s) or SSDs.
This function can be used to delete all data from internal or external hard disks or SSDs
connected via the eSATA port, b efore the hard disks are discarded or the complete
computer system is disposed of. The functi oncanalsobeusedifharddisksaretobe
completely deleted, e.g. before installing a new operating system.
The application c an only be selected and run if an administrator/supervisor
password has been assigned (Menu BIOS Setup - Security).
To erase data from SATA h
ard disks or SSDs, proceed as follows:
Call the BIOS Setup wi
th the Administrator/Supervisor password .
To start the application, select Erase Disk (BIOS Setup - Advanced or BIOS
Setup - Security) and set Start after Reboot.
Then select Save Cha
nges and Exit in the me nu Save & Exit / Exit to initiate
a reboot and start E
rase Disk.
Because of the rebo
ot, the Erase Disk will be started. You have the option
to interrupt the p
rocess during the user selection.
After the application starts, the Administrator/Supervisor password must
be entered for security reasons.
A dialogue eld appears in which a particular, several or all t he hard disks can be selected
for deletion. This depends on the number of hard disks in your system.
Select the hard disk(s) to be deleted. The selected hard disk(s) w ill be deleted one-by-one.
Erase Disk offers four deletion options, from fast (with one deletion pass) to very
secure (w ith 35 deletion passes). Depending on the algorithm chosen, the process
can take between ~10 seconds and ~10 minutes per G B:
Zero Pattern (1 pass)
German BSI/VS ITR (7 passes)
DoD 5220.22-M ECE (7 passes)
Guttmann (35 passes)
SSD driv
es are securely erased with the Enhanced Secure Erase ATA
comman
d integra ted in the rmware.
Select the desired deletion algorithm for the selected hard disks.
62 Fujitsu

Table of Contents

Related product manuals