Connecting e xtern a l devices
Connecting an external monitor to the port replicator
An analogue monitor is conn ecte d to the analogue VGA monitor port, a digital mon itor
to the DisplayPort on the optional Port Replicator. Including the internal screen , up
to 3 screens can be used simulta neously (please refer to "
Functio n keys and key
combinations", Page 24, section "Switching to output screen").
MonitorVGAconnec tionsocketMonitorportMonitor port
Analogue VGA monitor port (on optional port
replicator)
Digital DisplayPort (on optional Port Replicator)
► Switch off the not
ebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on
the external monitor and then the noteboo k.
You can also sw
itch between the external monitor and the LCD monitor of the
notebook, see
chapter "
Functio n keys and key combinations", Page 24.
You can displa
y the same picture o n the extern al monitor and the
notebook LCD
monitor simultaneously.
Fujitsu 53
To Next Page
Loading...
