Working with the notebook
Switching on the notebook via the port replicator
►PresstheON/
OFF button on the port replicator to switch the notebook on.
Switching off notebook via Port Replicator
► Close all applications and shut down your operating system (please refer
to the manual for the operating system).
► Press the ON/OFF button on the port replicator to switch the notebook off.
If the notebook cannot be shut down properly, press the ON/OFF button
of the notebook for about four seconds. The notebook will switch itself
off. Any unsaved data may however be lost.
Disconnecting the notebook from the Port Replicator
► Disconnect the supplied USB cable (USB Type-C) from the USB 3.1 Gen
1 port (USB Type-C) of the notebook.
42 Fujitsu