En-16
Setting Up (continued)
Lens Shift Function
By shifting the lens, the position of the image on the screen can be moved up and down.
To move the image up
Turn the lens shift knob clockwise.
To move the image down
Turn the lens shift knob anticlockwise.
Overhead Installation
• When fitting the projector to the ceiling, a ceiling attachment (optional) and ceiling unit flange pipe set (available on the market)
are necessary.
• The ceiling unit flange pipe set (pipe length) required differs according to the installation height. Consult the store where
purchased.
• Consult the store where purchased regarding installation work. A charge will be made for this work.
Warning
• Place at least 20cm away from the wall. Do not set up where ventilation is poor as this may lead to fire.
• Do not place on a carpet or blanket as this may block the suction inlet on the bottom of the projector.
Do not block the lamp ventilation holes as this may lead to fire.
2
Turn the lens shift knob to adjust the
position of the image.
3
After adjustment, press the lens shift
knob to withdraw it to its original
position.
1
Press the lens shift knob to extract
the knob so that it protrudes from the
projector.
Up
Down
To Next Page
Loading...