Fujitsu LPF-7200E - Adjusting the SOUND; Setting the DISPLAY

En-30
You can adjust and set up the following items from the SOUND Menu.
■ Volume
You can adjust the volume.
Press the adjustment button to increase the volume, and the button to
decrease the volume.
■ Treble
You can adjust the treble level.
Press the adjustment button to increase the level, and the button to
decrease the level.
■ Bass
You can adjust the power of the bass sounds.
Press the adjustment button to increase the strength, and the button to
decrease the strength.
■ Factory Default
You can return the adjusted sound values to their standard status (factory
default settings).
Select by pressing the and adjustment buttons, and decide by pressing
the ENTER button.
Adjusting the SOUND
Setting the DISPLAY
You can select and set up the following items from the DISPLAY menu.
■ Resizing
You can select whether to display the picture in real mode (with the same
resolution as the input signal) or in resizing mode (converting it to the same
XGA size as the LCD panel).
Select by pressing the and adjustment buttons.
The factory default setting is [On].
0
0
50
SOUND
Volume
Treble
Bass
Factory Default
: Select: Adjust
ENTER
: Decide
: Set up
OK Cancel
Default Factory Setting?
DISPLAY
Resizing
INPUT1 Mode
: Select : Set up
ENTER
: Next
On Off
Analog Digital
Source Status
All
No Signal No Display
Blank Screen
Blue Black
Language
English
SD HD
DISPLAY
Resizing
Language
Video Standard
Componet Input
Source Status
Blank Screen
Overscan
3D Y/C
: Select : Set up
ENTER
: Next
On
English
AUTO
Off
On Off
All
Blue
No Signal No Display
Black
Standard Medium Maximum
(VIDEO DISPLAY Menu)
(RGB DISPLAY Menu)