Fujitsu LPF-7200E - (To a Video;Laser Disk;DVD

En-19
EnglishFrançaisDeutschEspañol
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT
1
IN
PUT 2
IN
PUT 3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT 1
IN
PUT 2
IN
PUT
3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
External Connection (To a Video/Laser Disk/DVD)
Note
• Images input by component video input to INPUT 3 terminal can be viewed on a monitor TV connected to the RGB output
terminal. Images input to the VIDEO INPUT terminal cannot be viewed on the monitor TV.
• When connecting the projector to equipment with stereo sound output, be sure to connect the L/R audio output or stereo audio
cable. When there is no image input (blue background screen), there will be no audio output.
• For component video input, it is necessary to set the component signals separately. For details, see page 31.
[Projector Rear]
To S-VIDEO terminal
(used to connect
equipment with S image
output terminal)
To VIDEO & AUDIO
L/R terminals
(this connection
enables image and
sound output)
To S image
output terminal
To video/audio
output terminals
To AUDIO terminal
(used to connect
equipment with
component output
terminal)
To audio output terminal
(on equipment with
component output
terminal)
To Cr, Y, Cb
terminal
(used to connect
equipment with
component output
terminal)
To Cr, Y, Cb terminal
(on equipment with
component output
terminal)
Laser disk player Video deck
DVD player
S terminal cable
(optional)
AV cable
(supplied)
Stereo audio
cable (optional)
RCA-BNC
cable (optional)