Fujitsu LPF-7200E - Page 18

En-18
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT 1
IN
PUT 2
IN
PUT 3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT 1
IN
PUT 2
IN
PUT 3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
External Connection (To a PC) (continued)
Macintosh
To DIGITAL RGB
output terminal
(DVI-D terminal)
When using a MAC connector, set the dip switches as follows.
Mac 13" Mode (640 x 480) → Switches 1, 4, 6, 7 ON
Mac 16" Mode (832 x 624) → Switches 1, 3, 6, 7 ON
Mac 19" Mode (1024 x 768) → Switches 1, 2, 6, 7 ON
Mac 21" Mode (1152 x 870) → Switches 1, 2, 3, 4, 6, 7 ON
Note
• When connecting the projector to a Macintosh PC, be sure to use the optional MAC connector, otherwise a blank display may
result.
• When connecting the projector to a Macintosh notebook PC, in addition to the optional MAC connector, a special adapter
(available on the market) may be necessary.
• Use an RGB cable that matches the shape of the image output terminal of your PC.
• For details of the PC frequencies suitable for this projector, see the list of RGB-compatible frequencies on page 39.
[Projector Rear]
To 5-plug BNC
terminal
(used when using
5-plug BNC input
to prevent loss of
image quality)
To RGB output
terminal
MAC connector
(optional)
To RGB terminal
To monitor RGB
input terminal
(screen image can be
viewed on monitor)
To AUDIO
terminal
(sound can be
produced)
To sound output
terminal
To RGB terminal
(this connection
enables PC
images to be
projected)
To RGB output
terminal
MAC connector
(optional)
To DIGITAL RGB
terminal
(can be used when
the PC has a DVI-D
terminal)
RGB cable
(optional)
5-plug BNC
cable (optional)
Stereo audio
cable (optional)
RGB cable
(supplied)
DIGITAL RGB
cable (optional)