Fujitsu LPF-7200E - External Connection (to a PC

En-17
EnglishFrançaisDeutschEspañol
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT 1
IN
PUT 2
IN
PUT 3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
DIGITAL RGB
RGB AUDIO
AUDIO
RGB
AUDIO
AUDIO
AUDIORGB
S-VIDEO VIDEO L R
G
Y HV
IN
PUT 1
IN
PUT 2
IN
PUT 3
OUT
PUT
INPUT 4
R Cr Pr B Cb Pb
External Connection (To a PC)
• This projector can be connected to a PC, TV, video deck, laser disk player, video camera, etc.
• Before making any connections or disconnections, make sure that the projector and the equipment to which it is connected are
turned off. Read the instruction manual supplied with the equipment to which the projector is connected.
AT Interchangeable Equipment
To DIGITAL RGB
output terminal
(DVI-D terminal)
Note
• Use an RGB cable that matches the shape of the image output terminal on your PC.
• For details of the PC frequencies suitable for this projector, see the list of RGB-compatible frequencies on page 39.
[Projector Rear]
To 5-plug BNC
terminal
(used when using
5-plug BNC input
to prevent loss of
image quality)
To RGB output
terminal
To RGB terminal
To monitor RGB
input terminal
(screen image can be
viewed on monitor)
To AUDIO
terminal
(sound can be
produced)
To sound output
terminal
To RGB terminal
(this connection
enables PC
images to be
projected)
To RGB output
terminal
To DIGITAL RGB
terminal
(can be used when
the PC has a DVI-D
terminal)
RGB cable
(optional)
5-plug BNC
cable (optional)
Stereo audio
cable (optional)
RGB cable
(supplied)
DIGITAL RGB
cable (optional)