En-27
EnglishFrançaisDeutschEspañol
You can adjust, select and set up the following items on the IMAGE Menu.
■ Luminance Mode
You can set the luminance of the projector on [Normal] or [Low].
Select by pressing the and adjustment buttons.
The factory default setting is [Normal].
■ Brightness
You can adjust the brightness of the picture.
Press the adjustment button to make the picture brighter, and the
button to make it darker.
■ Contrast
You can adjust the contrast of the picture.
Press the adjustment button to make the contrast stronger, and the
button to make it weaker.
■ Sharpness (VIDEO)
You can adjust the image quality.
Press the adjustment button to make the image sharper, and the button
to make it softer.
■ Color (VIDEO only)
You can adjust the depth of the colors.
Press the adjustment button to make the colors deeper, and the button
to make them paler.
■ Tint (VIDEO only)
You can adjust the tint.
Press the adjustment button for a reddish tint, and the button for a
greenish tint.
■ Factory Default
You can return the image adjustment values to their standard status (factory
default settings).
Select by pressing the and adjustment buttons, and decide by pressing
the ENTER button.
■ Next Page
Press the ENTER button (or ) to proceed to the second page of the
IMAGE Menu.
■ Before Page
Press the MENU button to return to the first page of the IMAGE Menu.
Adjusting the IMAGE
(2nd page of IMAGE Menu)
0
0
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select
ENTER
: Next
Normal Low
0
0
0
0
0
IMAGE
Luminance Mode
Brightness
Contrast
Sharpness
Color
Tint
Factory Default
Next Page
: Select
ENTER
: Next
Normal Low
0
0
0
0
IMAGE
Before Page
Color Temp.
Gain : Red
Gain : Green
Gain : Blue
Save to Memory
Load from Memory
: Select
ENTER
: Next
(1st page of RGB IMAGE Menu)
(1st page of VIDEO IMAGE Menu)
0
Brightness
MENU
: Return : Adjust
0
Contrast
MENU
: Return : Adjust
0
Sharpness
MENU
: Return : Adjust
0
Color
MENU
: Return : Adjust
0
Tint
MENU
: Return : Adjust
ENTER
: Decide
: Set up
OK Cancel
Default Factory Setting?
To Next Page
Loading...