Fujitsu LPF-7200E - Page 28

En-28
■ Color Temp.
You can adjust the color temperature.
Press the adjustment button for a reddish tinge, and the button for a
blueish tinge.
■ Gain: Red
You can adjust the strength of the red color.
Press the adjustment button to make it stronger, and the button to make
it weaker.
■ Gain: Green
You can adjust the strength of the green color.
Press the adjustment button to make it stronger, and the button to make
it weaker.
■ Gain: Blue
You can adjust the strength of the blue color.
Press the adjustment button to make it stronger, and the button to make
it weaker.
■ Save to Memory
You can save the adjusted values in memory 1, 2, 3 or 4.
You can set INPUT 1, 2 and 3 and VIDEO INPUT (including S-video/
component video).
Use the and adjustment buttons to select [Save] or [Cancel], and the
and buttons to select memory 1, 2, 3 or 4, then press the ENTER button
to execute.
■ Load from Memory
You can load the adjusted values saved in the memory .
Use the and adjustment buttons to select [Load] or [Cancel], and the
and buttons to select memory 1, 2, 3 or 4, then press the ENTER button
to execute.
Adjusting the Image (continued)
0
Color Temp.
MENU
: Return : Adjust
0
Gain : Blue
MENU
: Return : Adjust
1 2 3 4
0
(0,0,0)
0
0
0
0
0
10
10
10
10
10
10
10
Save to Memory
Save
Cancel
Brightness
Contrast
Sharpness
Color
Tint
ENTER
: Decide
: Select : Set up
Color Temp.
Gain : (Red,Green,Blue)
Memory1 ValuePresent Value
1 2 3 4
0
(0,0,0)
0
0
0
0
0
10
10
10
10
10
10
10
Load from Memory
Load
Cancel
Brightness
Contrast
Sharpness
Color
Tint
ENTER
: Decide
: Select : Set up
Color Temp.
Gain : (Red,Green,Blue)
Memory1 ValuePresent Value
0
Gain : Red
MENU
: Return : Adjust
0
Gain : Green
MENU
: Return : Adjust