En-21
EnglishFrançaisDeutschEspañol
Turning the Projector On and Off
Basic Operation
POWER button
Turning On
•
Press the POWER button.
The POWER-ON monitor lights green and the lamp
comes on.
Turning Off
•
Press the POWER button.
The confirmation screen is displayed.
Green : In operation
Red : Standby status
Orange : Lamp cooling
Important
• Always remove the lens cap before turning the
lamp on, otherwise the lens cap may become
deformed.
• The power cannot be turned off by pressing the
POWER button again for 1 minute after the lamp
comes on.
• Turn the projector on before turning the PC on,
other wise the image display and mouse functions
(except when using an USB mouse) may be
adversely affected.
STAND-BY TEMP LAMP
POWER-ON
POWER-ON monitor display on projector front
(POWER-ON monitor)
POWER BUTTON WAS PUSHED!
Push POWER button or
Move the cursor to “Power Off”
and push ENTER button to turn
projector off.
Power Off Cancel
If you press the adjustment button to select [Power
Off] and then press the ENTER button, the power will
be turned off. You can also press the POWER button
again to turn the power off.
When [Power Off] is selected, the following opera-
tions are performed.
1. The POWER-ON monitor changes from red to
orange. (Lamp is cooling)
2. The cooling fan rotates for 2 minutes. The buttons
on the projector operation panel and the remote
control unit cannot be operated for 1 minute after
cooling of the lamp starts. (Operation can be
restarted after 1 minute.)
3. When cooling is finished, the fan stops, the
POWER-ON monitor changes from orange to red,
and the projector is in standby status.
Note
• The cooling fan continues to rotate while the
inside of the projector is hot, even after the
POWER button is pressed. Do not unplug the
power cable from the socket while the cooling
fan is rotating (approx. 2 minutes).
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUMESOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
VOLUME
ENTERMENU
STATUSAUTO
VIDEORGB
POWER
MUTE
KEY STONE
FOCUSZOOM
POWER button
To Next Page
Loading...