Fujitsu LPF-7200E - Page 22

En-22
Selecting the Desired Image
•
Press the RGB button or VIDEO
button.
The input source switches as shown below each time
the RGB button is pressed.
INPUT 1 - RGB [DIGITAL RGB or RGB (analog)]
INPUT 2 - RGB
INPUT 3 - RGB
Important
• Select digital or analog INPUT 1 signal on the
menu displayed. (See page 30)
The input source switches as shown below each time
the VIDEO button is pressed.
VIDEO
S-VIDEO
INPUT 3 - COMP (Standard or high definition
component)
Important
• Select SD (standard) or HD (high definition) for
the INPUT 3 component input signal. (See page
31)
The input source display is exited soon after the
selection is made.
Basic Operation (continued)
FOCUS buttons
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUMESOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
VOLUME
ENTERMENU STATUSAUTO
VIDEORGB
POWER
MUTE
KEY STONE FOCUSZOOM
Focusing
•
Press the FOCUS buttons
(
, ).
The operation screen is exited soon after making the
adjustment.
Adjusting the Size of the Picture
•
Press the ZOOM buttons ( , ).
Press to increase the size of the picture.
Press to decrease the size of the picture.
The operation screen is exited soon after making the
adjustment.
Note
• Match the size of the screen used to the projec-
tion distance. See “Setting Up” on page 15.
RGB button
ZOOM buttons
VIDEO button
FOCUS buttons
RGB button
ZOOM buttons
VIDEO button
➝
➝
➝➝
➝
➝
Focus
Zoom