En-23
EnglishFrançaisDeutschEspañol
Adjusting the Volume
•
Press the VOLUME buttons
(
, ).
The adjustment screen is displayed.
Press to increase the volume.
Press to decrease the volume.
The screen is exited soon after completing adjust-
ment.
Muting the Sound and Image
•
Press the MUTE button.
The sound and image can be temporarily muted by
pressing the MUTE button.
Mute status switches as shown below when the
MUTE button is pressed.
Sound muted ([MUTE] appears on screen)
Sound and image muted
Normal status
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUMESOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
VOLUME
ENTERMENU
STATUSAUTO
VIDEORGB
POWER
MUTE
KEY STONE
FOCUSZOOM
Mouse pointer
buttons
ZOOM-PAN buttons
CANCEL button
MUTE button
VOLUME buttons
MUTE button
VOLUME buttons
➝
➝➝
Partially Enlarging the Picture
1
Move the cursor to the area you
wish to enlarge using the mouse
pointer buttons on the remote
control unit.
2
Press the ZOOM-PAN buttons
(
,
).
Press to enlarge the image.
Press to return the enlarged image to its original
size.
The area can be enlarged 1 – 100 times (area ratio) in
20 stages each time is pressed.
Note
• Press the CANCEL button to cancel partial
enlargement and return to normal status.
• The mode is canceled when the menu screen is
displayed or when the input source is switched.
50
Volume
To Next Page
Loading...