En-24
Displaying Projector Status
•
Press the STATUS button.
The following statuses are displayed when the
STATUS button is pressed.
1 Present input source
2 Image mode in present input source
3 Lamp timer
4 Resizing status
5 Mute status
6 Volume status
7 Brightness
8 Contrast status
Press the STATUS button again to return to the
original screen.
Basic Operation (continued)
KEYSTONE buttons
Automatically Adjusting the Position
•
Press the AUTO button.
The horizontal position, vertical position, picture
width and picture blurring are automatically adjusted.
Displaying the Input Source
•
Press the SOURCE button.
The input source and image mode are displayed.
Press the SOURCE button again to return to the
original screen. (If no keys are pressed for xxx
seconds, the display returns to the original screen.)
Adjusting Distortion of the Image Trapezoid
•
Press the KEYSTONE buttons ( , ).
The adjustment screen is displayed.
When is pressed, the upper part of the image is corrected. When is pressed, the lower part of the image is corrected.
The screen is exited soon after adjustment is completed. (It can also be exited by pressing the MENU button.)
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUMESOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
VOLUME
ENTERMENU
STATUSAUTO
VIDEORGB
POWER
MUTE
KEY STONE
FOCUSZOOM
SOURCE button
AUTO button
STATUS button
KEYSTONE buttons
AUTO button
STATUS button
0
Keystone correction
To Next Page
Loading...