Fujitsu LPF-7200E - Page 26

En-26
5
Making the Desired Adjust/Set
up
5-1 When selecting the item you
wish to adjust ([OK/Cancel],
[Normal/Low], etc.)
• Select with the adjustment buttons
(
, ).
Example: Select [Normal/Low] in [Luminance
Mode].
5-2 When there is a mark (to next
screen) at the right of the item
you wish to adjust
Example: Select [Contrast].
(1) Press the ENTER button to display the
adjust/select/set up screen.
Note
• The same operation is possible by pressing the
and adjustment buttons.
(2) Make the desired Adjust/Selet/Set up
with the adjustment buttons (
, ,
, ).
Operating the Menu Screens (continued)
0
0
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select
ENTER
: Next
Normal Low
0
0
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
: Select
ENTER
: Next
Normal Low
0
Contrast
MENU
: Return : Adjust
0
0
50
SOUND
Volume
Treble
Bass
Factory Default
: Select: Adjust
5-3 When selecting the SOUND
menu in Step 3 and adjusting
the Volume/Treble/Bass
• Adjust using the and adjustment
buttons.
Note
• Volume/Treble/Bass can be adjusted on the Menu
screen.
6
Press the MENU button to return
to the previous screen.
Each time the MENU button is pressed, the display
reverts one screen.
Note
• When [ENTER : Decide] is displayed on the
operation bar and ENTER is pressed, the item is
adjusted and the display returns to the previous
screen.