Fujitsu LPF-7200E - Page 37

En-37
EnglishFrançaisDeutschEspañol
Name LCD projector
Model LPF-7200, LPF-7200E
Type 3-plate LCD type
LCD size 1.3 inch
LCD drive system P-Si TFT active matrix
No. of pixels 2,359,296 (1024 x 768 pixels x 3)
Lens Electric powered zoom lens F=1.8 – 2.15 f=48.4 – 62.9mm
Lamp 250W NSH lamp
Projected picture size 30 inch – 300 inch
Projection distance 0.7m – 17.6m
Optical axis shift –10.8° – +10.8°
Picture aspect ratio 4 : 3
Projection format Left/right/up/down with reverse display setting
Rated voltage AC 100V
Rated frequency 50/60Hz
Power consumption 450W [Approx. 11W on standby]
Working temperature range 5°C – 40°C
Storage temperature –15°C – 60°C
Input/Output Input Video : RCA pin x 1
terminals S image : S terminal x 1
Digital RGB : DVI-D terminal x 1
Analog RGB : 15-pin D-sub terminal x 2
Analog RGB/Component
: BNC x 5
Sound : RCA pin (R/L) x 1
: 3.5ø mini stereo jack x 3
Mouse : 8-pin mini DIN terminal x 1 (female connector)
: USB terminal x 1
Wired remote : 3.5ø mini jack x 1
RS232C (for service personnel)
: 9-pin D-sub terminal x 1
Output Analog RGB : 15-pin D-sub terminal x 1
Sound : 3.5ø mini stereo jack x 1
Speaker 3W x 2 (stereo)
Outside dimensions 15.0cm (Height) x 27.9cm (Width) x 40.1cm (Depth)
Mass Approx. 7.5kg
Accessories Wireless remote control unit x 1, Size AA battery x 2, Air filter x 1,
RGB cable x 1, AV cable x 1, PS/2 mouse connection cable x 1,
Power cable x 1, Lens cap x 1, Instruction Manual (this manual) x 1
• The specifications and external appearance may be altered for improvement purposes.
• Be sure to connect the earth of the power plug before use.
Specifications