En-39
EnglishFrançaisDeutschEspañol
PCAT VGAEGA 640 350 31.5 70.0
PCAT VGA 640 400 31.5 70.0
PCAT VGA 640 480 31.5 59.9
PCAT VGA 640 480 37.5 75.0
PCAT VGA 640 480 37.9 72.8
PCAT VGA 640 480 42.3 85.0
PCAT SVGA 800 600 35.2 56.3
PCAT SVGA 800 600 37.9 60.3
PCAT SVGA 800 600 48.1 72.2
PCAT SVGA 800 600 46.9 75.0
PCAT SVGA 800 600 52.5 76.0
PCAT SVGA 800 600 53.7 85.0
PCAT XGA 1024 768 48.4 60.0
PCAT XGA 1024 768 56.5 70.0
PCAT XGA 1024 768 60.0 75.0
PCAT XGA 1024 768 68.7 85.0
PCAT SXGA* 1152 864 67.5 75.0
PCAT SXGA* 1280 960 60.0 60.0
PCAT SXGA* 1280 1024 64.0 60.0
PCAT SXGA* 1280 1024 80.0 75.0
MAC 13-inch 640 480 35.0 66.7
MAC 16-inch 832 624 49.7 74.5
MAC 16-inch 832 624 49.1 75.1
MAC 19-inch 1024 768 60.2 74.9
MAC 19-inch 1024 768 48.2 59.3
MAC 21-inch* 1152 870 68.7 75.1
• * indicates simple display. It is not suitable for DIGITAL RGB input.
• No image appears even if the resolution and frequency mentioned above are the same.
• PC display mode
When an image signal is input from a PC, the projector automatically selects the mode (resolution and frequency) and projects
the picture according to that mode.
The projector fundamentally conforms to VESA (Video Electronics Standards Association) standards, but depending on the type
of PC, a non-VESA signal may be output. In such cases, the projected image will not be correctly displayed, the overall picture
will be blue in color, and the [No Signal] message will be displayed on the screen. In this case, reset the image signal from the
PC to another compatible mode. For details, refer to the above table and the instruction manual for the PC.
Note
• All names of companies and products contained in this manual are trademarks or registered trademarks of the respective
companies.
• VGA is a registered trademark of IBM.
• Macintosh is a registered trademark of Apple Computer Inc.
Table of RGB Compatible Frequencies
PC
Picture mode
Resolution
Frequency
Horizontal (dot) Vertical (line) Horizontal (kHz) Vertical (Hz)
To Next Page
Loading...