EasyManua.ls Logo

Fujitsu MHV2100AH - Table 5.21 DEVICE CONFIGURATION IDENTIFY Data Structure

Fujitsu MHV2100AH
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.3 Host Commands
C141-E217 5-61
Table 5.21 DEVICE CONFIGURATION IDENTIFY data structure
Word Value Content
0 X'0001' Data structure revision
1 X'0007' Multiword DMA modes supported
Reflected in IDENTIFY information "WORD63".
Bit 15-3: Reserved
Bit 2: 1 = Multiword DMA mode 2 and below are supported
Bit 1: 1 = Multiword DMA mode 1 and below are supported
Bit 0: 1 = Multiword DMA mode 0 is supported
2 X'003F' Ultra DMA modes supported
Reflected in IDENTIFY information "WORD88".
Bit 15-6: Reserved
Bit 5: 1 = Ultra DMA mode 5 and below are supported
Bit 4: 1 = Ultra DMA mode 4 and below are supported
Bit 3: 1 = Ultra DMA mode 3 and below are supported
Bit 2: 1 = Ultra DMA mode 2 and below are supported
Bit 1: 1 = Ultra DMA mode 1 and below are supported
Bit 0: 1 = Ultra DMA mode 0 is supported
3-6 - Maximum LBA address Reflected in IDENTIFY information
"WORD60-61". (WORD100-103) *
7 X'30CF'
(X'39CF') *
Command set/feature set supported
Reflected in IDENTIFY information "WORD82-87".
Bit 15-14: Reserved
Bit 13: 1 = SMART Conveyance self-test supported
Bit 12: 1 = SMART Selective self-test supported
Bit 11: * 1 = FUA (Forced Unit Access) supported
Bit 10: Reserved
Bit 9: 1 = Streaming feature set supported
Bit 8: * 1 = 48-bit Addressing feature set supported
Bit 7: 1 = Host Protected Area feature set supported
Bit 6: 1 = Automatic acoustic management supported
Bit 5: 1 = READ/WRITE DMA QUEUED commands supported
Bit 4: 1 = Power-up in Standby feature set supported
Bit 3: 1 = Security feature set supported
Bit 2: 1 = SMART error log supported
Bit 1: 1 = SMART self-test supported
Bit 0: 1 = SMART feature set supported
8-254 X'0000' Reserved

Table of Contents

Related product manuals