EasyManua.ls Logo

Fujitsu MHV2100AH - Environmental Specifications; Figure 1.2 Current Fluctuation (Typ.) at +5 V When Power Is Turned on; Table 1.4 Environmental Specifications

Fujitsu MHV2100AH
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Overview
1-8 C141-E217
(5) Current fluctuation (Typ.) at +5 V when power is turned on
Figure 1.2 Current fluctuation (Typ.) at +5 V when power is turned on
(6) Power on/off sequence
The voltage detector circuits monitor +5 V. The circuits do not allow a write
signal if either voltage is abnormal. These prevent data from being destroyed and
eliminate the need to be concerned with the power on/off sequence.
1.4 Environmental Specifications
Table 1.4 lists the environmental specifications.
Table 1.4 Environmental specifications
Item Specification
Temperature
• Operating
• Non-operating
• Thermal Gradient
5 °C to 55 °C (ambient)
5 °C to 60 °C (disk enclosure surface)
–40 °C to 65 °C
20 °C/h or less
Humidity
• Operating
• Non-operating
Maximum Wet Bulb
8 % to 90 % RH (Non-condensing)
5 % to 95 % RH (Non-condensing)
29 °C (Operating)
40 °C (Non-operating)
Altitude (relative to sea level)
• Operating
• Non-operating
–300 to 3,000 m
–300 to 12,000 m

Table of Contents

Related product manuals