Fujitsu MHV2100AH - System Configuration; ATA Interface; Drive Connection; Figure 2.2 1 Drive System Configuration

2.2 System Configuration
C141-E217 2-3
(6) Read/write circuit
The read/write circuit uses a LSI chip for the read/write preamplifier. It improves
data reliability by preventing errors caused by external noise.
(7) Controller circuit
The controller circuit consists of an LSI chip to improve reliability. The high-
speed microprocessor unit (MPU) achieves a high-performance AT controller.
2.2 System Configuration
2.2.1 ATA interface
Figures 2.2 and 2.3 show the ATA interface system configuration. The drive has
a 44pin PC AT interface connector and supports PIO mode 4 transfer at 16.6
MB/s, Multiword DMA mode 2 transfer at 16.6 MB/s and also U-DMA mode 5
(100 MB/s).
2.2.2 1 drive connection
MHV2100AH
MHV2080AH
MHV2060AH
MHV2040AH
Figure 2.2 1 drive system configuration