1.1 Overview of the Sensor Driver
◆ Sensor Driver for Extended Function (Linux Version)
This is the Sensor driver for extended function.
The Sensor driver for extended function for Linux can be used for both PalmSecure
Sensor and PalmSecure Sensor V2; however, Sensor’s extended function is not
available if you connect a PalmSecure Sensor.
>See> For information on the extended function of the Sensor, refer to the
"System Development Guide".
The Sensor driver for extended function for Linux is provided as the source code.
The following table indicates the provided Sensor driver for extended function
for Linux and their files.
Sensor driver for extended function for Linux
Linux (x86) version
fjveincam.c
!Caution About Sensor driver for extended function for Linux
Operations of the Sensor driver for extended function for Linux are not
guaranteed in customers’ environments. It is customers’ responsibility
to verify the operations.
>See> For details of the Sensor driver for extended function for Linux, refer to
"Chapter6 Installing the Sensor Driver for Extended Function (Linux
Version)".
To Next Page
Loading...