Fujitsu PalmSecure SDK V02 - Uninstalling the Sensor Driver in Windows XP; Vista; 7 Environments

2.2 Uninstalling the Sensor Driver in Windows XP / Vista / 7 Environments
23
2.2 Uninstalling the Sensor Driver in
Windows XP / Vista / 7 Environments
This section describes how to uninstall the Sensor driver in Windows XP / Vista / 7
environments.


O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
Step1 Ensure that the Sensor is connected to the target hardware.
Step2 Log in as Administrator.
Step3 Start Device Manager.
<For Windows XP>
Select [System] from Control Panel, the [Hardware] tab and click the
[Device Manager] button.
<For Windows Vista>
Select [System and Maintenance] from Control Panel, and select
[Device Manager].
<For Windows 7>
Select [Hardware and Sound] from Control Panel, and select
[Device Manager].
Step4 Delete device information of the Sensor driver from Device Manager.
<For Windows XP>
Right click [FUJITSU USB Capture Device] under [Universal Serial
Bus controllers] and select [Uninstall] from the menu.
<For Windows Vista / 7 (x86)>
Right click [FUJITSU USB Capture Device] under [Universal Serial
Bus controllers] and select [Uninstall] from the menu.
<For Windows Vista / 7 (x64)>
Right click [PalmSecure Sensor Device] under [PalmSecure] and select
[Uninstall] from the menu.
Step5 Click the [OK] button in the displayed dialog box.
★Tip A check box [Delete the driver software for this device] is
displayed
The [Delete the driver software for this device] check box may
be displayed in a Windows Vista / 7 environment.
Check on the check box and click the [OK] button.