Fujitsu PalmSecure SDK V02 - Page 6

iv
◆ Composition of This Document
This document consists of the following four sections (six chapters).
Section/Chapter Title
Description
Section Ⅰ Overview
Chapter 1
Preliminary Steps before
Installing the Sensor Driver
Describes things that you should know before
installing the Sensor driver.
Section Ⅱ
Conventional Sensor Driver
(Windows Version)
Chapter 2
Installing the Sensor Driver
by Using Installer Version
Describes how to install the Sensor driver by
using Installer version.
Chapter 3
Installing the Sensor Driver
Manually by Using Archive
Version
Describes how to install the Sensor driver
manually by using Archive version.
Chapter 4
Applying Modification to the
Sensor Driver Manually
which is Installed by Using
Archive Version
Describes how to apply modification to
the Sensor driver manually which is installed
by using Archive version.
Section Ⅲ
Sensor Driver
for Extended Function
(Windows Version)
Chapter 5
Installing the Sensor Driver
for Extended Function
(Windows Version)
Describes how to install the Sensor driver
for extended function for Windows.
Section Ⅳ
Sensor Driver
for Extended Function
(Linux Version)
Chapter 6
Installing the Sensor Driver
for Extended Function
(Linux Version)
Describes how to install the Sensor driver
for extended function for Linux.